Custom Pocket Wizard, CyberSync and Elinchrom Skyport Cables
The sync cables below link the Pocket Wizard, CyberSync or Elinchrom Skyport to various manufacturers' flash units.
If the type of cable you need is not listed, please contact us detailing your needs. We fabricate custom cables.
Item #0126 — Female Hotshoe to Pocket Wizard, CyberSync or Elinchrom Skyport
Provides a sync connection for the Canon 580EX, 550EX, 430EX, 430EX II, 540EZ, Nikon SB-600 & many other flash units without a sync connector on the flash.
New! Item #0141 — Sony Proprietary Hotshoe to Pocket Wizard, CyberSync or Elinchrom Skyport
This adapter has a hotshoe specifically designed for the Sony ⁄ Minolta proprietary hotshoe. The attached cord provides a sync connection to a Pocket Wizard, and Elinchrom Skyport receiver or a CyberSync receiver.
Item #0071 — Elinchrom Skyport to Vivitar 285HV Adapter
This adapter is specifically for the new Vivitar 285HV and the Elinchrom Skyport. The Elinchrom Skyport will not fire the new version of the Vivitar 285HV and this adapter solves that functional problem.
New! Item #0148 — Screwlock PC to Right Angle SubMiniPhone (2.5mm) Plug - 30cm long (12 inches)
To connect a CyberSync transmitter to a camera equipped with a screwlock PC port on the chassis. This heavy-duty, 4mm cord has a screwlock PC connector on one end and a right angle SubMiniPhone Plug (2.5mm - 3⁄32 inch) on the other end.
Item #0087 — Deluxe Double Right Angle Miniphone Plug (1⁄8 inch - 3.5mm) to Pocket Wizard, CyberSync or Elinchrom Skyport
This adapter was designed for FlashZebra.Com Item #0023 — Canon 580EX Replacement Foot Assembly with Installed Mini Jack Sync Port, & also works on Alien Bee, Elinchrom D-Lite, & other flash units that accept the miniphone plug (1⁄8 inch - 3.5mm) sync connector.
Item #0062 — Deluxe Right Angle Mini Plug (1⁄8 inch - 3.5mm) to Pocket Wizard, CyberSync or Elinchrom Skyport
Designed specifically for FlashZebra.Com Item #0023 — Canon 580EX Replacement Foot Assembly with Installed Mini Jack Sync Port. It also works on Alien Bee, Elinchrom D-Lite, and numerous other flash units that accept the Mini Plug (1&frasl/8" - 3.5mm) sync connector.
One Mono miniphone plug (male) to two Mono miniphone plugs (male) — 3.5mm - 1 ⁄ 8 inch, this splitter is especially useful for multiple flash setups using Mono miniphone cords and adapters.
Item #0040 — Coiled Male PC to Pocket Wizard, CyberSync or Elinchrom Skyport
This adapter will directly connect flash units that require a Male PC connector (such as the Nikon SB-24, SB-25, SB-26, SB-28, SB-800 & many other flash units).
Item #0120 — Male PC to Pocket Wizard, CyberSync or Elinchrom Skyport
This cord has a male PC connector on one end and a mono miniphone plug (1/8" – 3.5mm) on the other, and can be used to connect a flash with a female PC connector to a Pocket Wizard, CyberSync or Elinchrom Skyport.
Item #0112 — Canon 1XXA Series Flash to Pocket Wizard, CyberSync or Elinchrom Skyport
Allows you to connect Canon flash units including the 299T, 199A, 177A, 155A & a few Toshiba & Mikona flash units to any of the Pocket Wizard radio slave receivers or transceivers, the Elinchrom Skyport receiver, or the CyberSync receiver.